Home / Construction
/ Products / ACRYZINC® / Storage
and Handling
ACRYZINC®
Storage and Handling
At the roll-former:
 |
The coils must be inspected upon receipt
by the Buyer to ensure that no water damage has occurred
during shipment and discoverable damage (if any) must be
reported to the Seller
|
|
The coils must be used within 90 days from
the date of receipt at the Buyer's plant
|
|
During storage at the Buyer's plant, the coils
must be kept in a dry, temperature-controlled
environment
|
|
After roll-forming, the panels must be sent
to the job site within one month after fabrication
|
|
During storage at the Buyer's plant - prior to
shipment to the job site - the roll-formed bundles must be
maintained in a dry, temperature-controlled environment
|
|
During shipment to the job site, the
bundles must be covered to protect the shipment from
moisture intrusion |
At the job site:
|
Upon arrival at the job site, the
roll-formed sheet bundles must be inspected to ensure
that no water damage has occurred during shipment and
discoverable damage (if any) must be reported to the Seller
|
|
At the job site, the bundles must be
protected from the elements by storing them indoors or, at a
minimum, storing them on protected pallets with a canvas or
other waterproof covering, leaving the bottom of the
covering open to allow air movement - the bundle must be
tilted to allow free drainage of moisture
|
|
At the job site, the bundles must also be
protected from exposure to corrosive chemicals and
fumes |
|
|
|
|
